Skip to content
HUGE Discounts on Non-Contact Voltage Detectors by Enespro until the end of October!
HUGE Discounts on Non-Contact Voltage Detectors by Enespro until the end of October!
Black, white, orange color Chicago Protective Apparel AG43 electrical safety kitr on white background

Chicago Protective Apparel AG43 43cal Jacket & Bib Kit and Gloves | SALE

Save 27% Save 18%
$1,940.00
$1,940.00 - $1,940.00
$1,940.00
$1,585.00
$1,415.00 - $1,585.00
$1,585.00
by Life Protectors LLC

Chicago Protective Apparel AG43 Jacket/Bib Kit with Gloves 43 Cal.  SM-5XL

THESE COME IN A DEFAULT 32" INSEAM. IF YOU NEED A DIFFERENT INSEAM SIZE, PLEASE CONTACT US.


Our CPA “Special Offer Discount” along with No Sales Tax/Free Shipping is a real money saver! Buy Now. Limited time offer.

You will receive a factory sealed carton with all items listed, and shipped to your door by Chicago Protective Products.  We are a worldwide authorized CPA distributor

Our 43 cal Jacket & Bib Kits include the following items:  Jacket: SWJ-43  Bib Overall: SWB-43  Hard Cap: HC-Color-SLT  Full Hood: SHW-43  14" Class 2 Rubber Gloves: LRIG-2-14  12" Leather Protector Gloves: LLPG-12  15" Glove Bag: GB-15  Gear Bag: 909-ARC  Safety Glasses: SW-SG  Ear Plugs: SW-EAR

NOTE: Life Protectors only sells our kits COMPLETE in unopened boxes. Be careful with some distributors who sell these kits incomplete.

Our kits containing rubber protective voltage gloves, and glove kits, are shipped directly to you from CPA.  This is important because some vendors stock voltage protecting rubber gloves and kits with same, and the rubber gloves when stored improperly (near excessive heat, folded, etc), or for long periods of time before sale, can become ineffective and dangerous to use, thus require proper testing before being put into use. See below from OSHA about testing.

 Testing and Inspection. Gloves and sleeves must be electrically tested before being issued for use. They must also be visually inspected and gloves need to be air tested for any possible defects (for example, cuts, holes, tears, embedded objects, changes in texture) before each day's use and whenever there is a reason to believe they may have been damaged. Best practice is to inspect PPE and air test the gloves and sleeves before each use. [See 1910.137(b)(2)].

  • Insulating equipment may not be used if any of the following defects are present: holes, tears, punctures or cuts, ozone cutting or ozone checking, embedded foreign objects, texture changes, including swelling, softening, hardening, or becoming sticky or inelastic, and any other defect that damages the insulating properties. [See 1910.137(b)(2)(iii) and ASTM F1236-96, Standard Guide for Visual Inspection of Electrical Protective Rubber Products].
     
  • Insulating equipment failing to pass inspection must be removed from service and may not be used by workers.
  • Protector Gloves and Storage. To ensure worker safety and the integrity of the gloves and sleeves, insulating gloves need to be worn along with protector gloves (such as leather), and both insulating gloves and sleeves need to be stored properly when not in use. Proper storage means that gloves must not be folded and need to be kept out of excessive heat, sunlight, humidity, ozone, and any chemical or substance that could damage the rubber. [See 1910.137(b)(2)].

    Proposed rule: 1910.269

    The proposed rule recognizes Class 0 and 00 gloves. See the proposed rule for additional information.
    For additional information on the use of insulating gloves and sleeves, see ASTM F496, Standard Specification for In-Service Care of Insulating Gloves and Sleeves, and ASTM F1236-96, Standard Guide for Visual Inspection of Electrical Protective Rubber Products. Additionally, see 1910.137(b)(2).


Arc Flash Hazard and NFPA 70E Standard Arc flash events are unique and extremely dangerous exposures that workers encounter while doing electrical work. Although the majority of workplace electrical injuries result from electric shock, the burns from the release of intense radiant energy during an arc flash event can cause severe, and even fatal injuries. Temperatures can reach as high as 35,000°F, with fatal burns occurring even at distances over ten feet. Given how dangerous this hazard is, protective measures must be put in place for worker safety. According to the NFPA 70E, employers are required to perform an arc flash hazard analysis to determine the flash protection boundary distance. Based on the results of the analysis, employees must wear protective clothing for the corresponding PPE category, that has an ATPV of at least the value listed in the “Protective Clothing Characteristics” section of the standard. The NFPA 70E sets forth requirements and guidelines for the selection of arc flash clothing, such as coverage, fit, layering, and very importantly, the fabrics it is made of. Protective clothing made from arc-rated, flame-resistant materials, provide thermal protection, and will not continue to burn after the ignition source is removed. These fabrics protect the user by providing a thermal barrier, and minimize the injuries that result from clothing that continues to burn. The use and recognition of the NFPA 70E standard is growing more widespread, since the vast majority of major companies in the U.S. have some employees who work on or near energized electrical conductors or circuit parts. Garments that meet the ASTM F1506 and NFPA 70E are also in compliance with OSHA 29 CFR 1910.269 Electrical Power Generation, Transmission and Distribution, with regard to protective clothing not contributing to burn severity. In addition, the Department of Energy has required that federal and contractor employees comply with NFPA 70E, and the 2002 National Electric Code (NEC) references the standard. Finally, OSHA considers the NFPA 70E standard “a recognized industry practice.”