MIRA Safety Gas-Mask-Mic Gas Mask 2 Pin Microphone No Tax SEE NOTE

Important Note: Mira Safety, of which we have been an authorized distributor for years, enforces on all distributors what is called MAP which is Minimum Advertised Price.  This means that all distributors must list on their websites and all forms of advertising the MAP price or a higher price.  Distributors may list for any price they want to but cannot advertise a lower price than the Minimum Advertised Price (MAP).  Many years ago MAP was quite common but is now considered by many including Life Protectors LLC to be very outdated.  No one that is an authorized distributor is allowed by Mira Safety to violate the MAP pricing. But we can negotiate much lower prices, which we regularly do, whether it is for a large volume order or just a single item.  All you need to do is send us an email or give us a call and we guarantee we will sell any Mira Safety product at a significantly lower price than the MAP price that is forced on us and all distributors.  Our target customers are municipalities, US government, all branches of the US military, fire, police, first responders, industry, and we are happy to supply safety products to the general public.  We do offer large discounts for volume orders. Contact us via email at steve@lifeprotectors.com, sales.lifeprotectorsinc@gmail.com, or call us at 800-485-1338 or 406-270-8879.  You won't be disappointed in our discounted prices, no state or local sales tax anywhere, and top customer service. In business now for 47 years.  Thank you for your time and support.  Steven Shepard/President  Life Protectors LLC

2-pin connector for compatibility with Peltor and Ops-Core headsets. Tested to provide an over 30,000 hours of use. IP67-rated for protection against dust, water, and oil

• Weighs less than two ounces, including the cable

• Get crystal clear communication in any environment with the MIRA Safety Gas Mask Microphone. It’s engineered to replace the existing exhalation valve cover of your MIRA Safety gas mask, an upgrade that can be installed in seconds without tools. This 2-pin microphone offers integrated noise-canceling functionality with no additional power needed. 

   Worldwide MIRA distributor.

  KEY BENEFITS OF MIRA SAFETY GAS MASK MICROPHONE

  • Noise-canceling, dynamic, moving-coil microphone in a tough polymer housing
  • 2-pin NEXUS U-173/U connector for compatibility with Peltor and Ops-Core headsets
  • Replaces your existing gas mask exhalation valve cover for quick and easy installation (no expert installation needed)
  • Heavy-duty polymer construction with durable retaining ring
  • Serviceable, with parts available in case of damage
  • Optimized for all-weather use (-33°C to +77°C) in any environment
  • Pivoting cable allows for easy ambidextrous alignment
  • Engineered to meet MIL-STD-461G and MIL-STD-810G
  • Provides an average of over 30,000 hours of use
  • IP67-rated for protection against dust, water, and oil
  • Can be fully submerged in up to 3 feet of water for ½ hour (not recommended)
  • Weighs less than two ounces (2 oz.), including the cable
  • Made in the Czech Republic 

  
  

  MIRA Safety gas masks come with enhanced speech diaphragms that allow for improved communication over shorter distances. But talking through a gas mask is never easy. Especially if you’re not right next to each other or you’re dealing with any noise, weather, or other distractions.

  
  

  The MIRA Safety Gas Mask Microphone is cross-compatible with all adult-sized MIRA Safety gas masks, making it easy to swap between masks for different types of missions. 

  Installation takes just a few seconds, and you’re ready to connect to your existing communication system. Just like a standard headset, the microphone requires no additional power, and it has an average life expectancy of 30,000 hours.

  Gas mask microphones are a relatively minor upgrade that can make a massive difference while using your mask. Communicating via hand signals is difficult in the best situation, and it’s impossible if you’re holding a rifle or riot shield. Having the ability to plug into your existing comms helps you stay better informed and make better decisions when they matter most.

  GAS MASK MICROPHONE TECHNICAL DATA:

  Electro-Acoustic Data
  Type:	Noise cancelling, Dynamic, Moving Coil
  Output Impedance (1kHz):	150Ω ± 10%
  Real Output Level (at usual voice level):	3.5mV rms ± 10%
  Harmonic Distortion:	max. 5% over a bandwidth of 315 Hz to 4000 Hz
  Frequency Response (94 dB SPL, 1/1 octave bands):	500 Hz	-5 ± 3 dB
  	1000 Hz	Reference
  	2000 Hz	0 ± 3 dB
  	4000 Hz	2 ± 3 dB

    

  Environmental & Other Data
  Weight (including cable):	50g ± 10%
  Cable Connector Type:	NEXUS U-173/U
  Cable Connector Pinout:	1 - Microphone Signal (MIC +)
  	2 - Microphone Signal (MIC -)
  Cable Length:	400mm 150Ω ± 5%
  Cable Strength:	20 N / 20 S
  Operating Temperature:	(-33 to +71) °C
  CE Certification:	Approved according to PPE directive 89/686/EEC and EMC directive 89/336/EEC
  EMC / EMI:	Designed in accordance with MIL-STD-461G
  Environmental:	Designed in accordance with MIL-STD-810G
  CBRN:	Designed in accordance with ČSN EN 140
  Ingress Protection (IEC standard 60529):	IP67
  Flame Retardant Properties (UL 94):	min. level V2
  Mean Time Between Failures (MTBF):	>30,000 hours

   

  IMPORTANT NOTE: This gas mask microphone is ONLY compatible with MIRA Safety respirators. This includes the CM-6M, CM-7M, and the TAPR. 

  STORAGE: The gas mask microphone is designed to be stored with your CM-6M or CM-7M gas mask. See storage guidance for those masks.