Skip to content
HUGE Discounts on Non-Contact Voltage Detectors by Enespro until the end of October!
HUGE Discounts on Non-Contact Voltage Detectors by Enespro until the end of October!
NSA arc flash multi color kit KIT4SC55 on white background

National Safety Apparel KIT4SC55 Arc Flash 55CAL Complete Kit

€1.363,95 - €1.462,95
€1.363,95
€1.363,95 - €1.462,95
€1.363,95
by Life Protectors LLC

National Safety Apparel KIT4SC55 | $1,398.97 | No Sales or Local Tax and FREE Shipping | Arc Flash 55CAL Complete Kit Leather Protectors, Glove Bag, Gear Bag | Arc Rating: 55 cal/cm²  CAT 4 |

Fabric/Material: Double-layer TECGEN CC™  30% lighter than standard 40 cal  FR hook and loop front closure  Stand up collar for extra coShort Coat & Bib Overall, Arc Flash Hood & Bag, Safety Glasses, Voltage Gloves

  •  Rib knit cuffs for comfortable, secure fit
  •  Garments embroidered with arc rating
  •  Quick disconnect and adjustable shoulder straps on bib overalls
  •  Expandable leg opening to fit over boots
  •  Hook and loop at side of bib for easy access
  •  Arc Rating: 55 cal/cm²
  •  CAT 4
  •  NFPA 70E
  •  CSA Z462
  •  ASTM F1506
  •  OSHA 1910.269
  • WE AT LIFE PROTECTORS HAVE FOR MANY YEARS BEEN AN AUTHORIZED NATIONAL SAFETY APPAREL DISTRIBUTOR.  WE HAVE THE NSA WAREHOUSE SHIP DIRECTLY TO YOU SO YOU WILL ALWAYS RECEIVE THE FRESHEST PRODUCTS.  GLOVES ARE TESTED AND CERTIFIED JUST BEFORE SHIPPING. MADE TO ORDER.
  • Authorized worldwide NSA distributor 


Testing and Inspection. Gloves and sleeves must be electrically tested before being issued for use. They must also be visually inspected and gloves need to be air tested for any possible defects (for example, cuts, holes, tears, embedded objects, changes in texture) before each day's use and whenever there is a reason to believe they may have been damaged. Best practice is to inspect PPE and air test the gloves and sleeves before each use. [See 1910.137(b)(2)].
  • Insulating equipment may not be used if any of the following defects are present: holes, tears, punctures or cuts, ozone cutting or ozone checking, embedded foreign objects, texture changes, including swelling, softening, hardening, or becoming sticky or inelastic, and any other defect that damages the insulating properties. [See 1910.137(b)(2)(iii) and ASTM F1236-96, Standard Guide for Visual Inspection of Electrical Protective Rubber Products].
     
  • Insulating equipment failing to pass inspection must be removed from service and may not be used by workers.
  • Protector Gloves and Storage. To ensure worker safety and the integrity of the gloves and sleeves, insulating gloves need to be worn along with protector gloves (such as leather), and both insulating gloves and sleeves need to be stored properly when not in use. Proper storage means that gloves must not be folded and need to be kept out of excessive heat, sunlight, humidity, ozone, and any chemical or substance that could damage the rubber. [See 1910.137(b)(2)].

    • For additional information on the use of insulating gloves and sleeves, see ASTM F496, Standard Specification for In-Service Care of Insulating Gloves and Sleeves, and ASTM F1236-96, Standard Guide for Visual Inspection of Electrical Protective Rubber Products. Additionally, see 1910.137(b)(2).
    • Product Code: KIT4SC55_ _ _ _
    Arc Rating: 55 cal/cm²7.5 oz TECGEN CC™
    • 7 oz Quilted Nomex® lining
    • ASTM F1506
    • OSHA 29 CFR 1910.269
    • NFPA 70E-2015 for Arc Flash
    • CSA Z462-15 for Arc Flash (Canada)
    • Hood Bag
    • Large Gear Bag
    • Rubber Voltage Gloves
    • 10" Leather Protectors
    • TECGEN CC™ Short Coat
    • TECGEN CC™ Bib Overall
    • TECGEN CC™ Arc Flash Hood